![]() So you don’t crack the glass but make it firm enough. We’ve already put our screws on just loosely we take the glass that came with the fan, put it over goes into place, and you tighten all three screws down firmly are sure not to overtighten. So it goes into place, and your holes line up, and you put your screws back in now that you’re like it’s in place. ![]() You’re going to put your three screws back in to hold your Lycan into place just tuck your wires there’s a notch on the cap that lines up with the forward-reverse switch on the fan. Make sure your wire nuts are down tight, and you have your light kit wired next. This is the hot lead for the light kit, and then we’ll assemble the blue and black together. So you put your blue wire and your black wire together. So put them, just put them loosely on in this next step, we’re going to attach the black kit with our screws, and our cap on you find your white and the blue wire will be jacketed with safety.Īnd it also calls that once your white and white wires are together, it’s light kit wires. It would help if you put it on to hold the glass it’s a good time to do that now before you put it onto the fan. Once you have the cap on you, have 15 screws. Remember more spices, and your cap to your kit goes over, and screws into place tighten it down the cap is now on your kit. In this part, we’re removing the center cap to reveal the thread use a screwdriver or anything push it out and take it out and disregard this piece, then you take your light kit. So you have your cap you’ll need this cap to put onto your light kit. Then, on the bottom of the fan, there are three screws. We’re going to do a basic installation for a light kit. Can you add a light kit to any ceiling fan?.Do you need a professional to install a ceiling fan?.Westinghouse ceiling fan light kit parts. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |